Работа с MicroStock+ Sync/en: различия между версиями

Материал из MPlusWiki
Перейти к навигации Перейти к поиску
(Новая страница: «===Windows users=== Download an installation package, open it with a double click and follow the instructions. Allow the installation if required. Once the instal...»)
 
(не показано 13 промежуточных версий 2 участников)
Строка 1: Строка 1:
Microstock+ Sync is a software for one-way synchronization between an M+ cloud storage and your PC. As long as synchronization is active, all chosen folders with subfolders will keep downloading on your hard drive and all changes in M+ (i.e. file statuses and metadata) will keep transferring to the saved files.<br />
+
Microstock+ Sync is a software for one-way synchronization from the M+ cloud storage to your PC. The program allows you to finely select the folders you would like to keep synchronized and preserves the M+ directory structure. As long as the synchronization is active, any changes in files and metadata in the selected folders are instantly reflected on your hard drive.<br />
The sortware is free to use and runs on Windows, Mac OS X and Linux.
+
The sortware is completely free to use and runs on Windows, Mac OS X and Linux.
  
 
==Downloading and installing M+ Sync==
 
==Downloading and installing M+ Sync==
In the M+ interface click a proper point in the left menu to go to the M+Sync landing page.
+
Simply click on the M+ Syncer section in the M+ interface to get to the app home page.
 
<gallery widths=500px heights=200px perrow=7>
 
<gallery widths=500px heights=200px perrow=7>
File:Sync start 2.png|center|frame|
+
File:Sync start 2_eng.png|center|frame|
 
</gallery>
 
</gallery>
Click the "Download" button and choose your operational system to download an installer.
+
Click the "Download" button and choose your OS to download the installer.
  
 
===Windows users===
 
===Windows users===
Download an installation package, open it with a double click and follow the instructions. Allow the installation if required. Once the installation is completed, you can launch a program with a shortcut on the desktop or from the Start menu.
+
Download the installation package, run it with a double click and follow the instructions. Permit the installation if the system asks you to. Once the installation is completed, you can launch the program using its shortcut on the desktop or from the Start menu.
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
===Mac OS X users===
===Пользователи Mac OS X===
+
Download the installation package and open it with a double click. It will mount the installer image automatically and you will see the "Microstock+ Sync Installer" icon on your desktop. Open it with a double-click and move the app in the window that will appear as the arrow there suggests.
Скачайте установочный файл и запустите его двойным кликом. При этом произойдет автоматическое монтирование образа, а на рабочем столе появится файл «Microstock+ Sync Installer». Откройте его двойным кликом, а затем перетащите приложение в папку внутри появившегося окна (как указывает стрелка).
 
</div>
 
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
<gallery widths=300px heights=200px perrow=7>
<gallery widths=400px heights=200px perrow=7>
+
File:Sync mac start.png|center|frame|Installer file with a logo
File:Sync mac start.png|center|frame|Установочный файл с логотипом программы
+
File:Sync mac start2.png|center|frame|Drag and drop the app
File:Sync mac start2.png|center|frame|Перетащите файл и отпустите
+
</gallery>
 +
 
 +
Apple doesn't allow running third-party apps if they don't have the Trusted eSign even if they're 100% safe. To bypass the protection system please do the following:
 +
* Launch the program. You'll receive a message that the program has been blocked by the security system
 +
* Open the settings and find "Security and Privacy" section
 +
* Click the "Open anyway" button
 +
* Commit the changes in the dialogue box
 +
 
 +
<gallery widths=450px heights=400px perrow=7>
 +
File:Launch_mac1.jpg|center|frame|Settings
 +
File:Launch_mac2.jpg|center|frame|The dialog box
 
</gallery>
 
</gallery>
</div>
 
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
The alternative way:
Компания Apple запрещает запуск скачанного из интернета ПО, если оно не имеет специальной цифровой подписи, даже если оно полностью безопасное, и вы ему доверяете. Они прикрываются тем, что якобы не доверяют содержимому. Чтобы обойти их систему безопасности нужно сделать следующие действия:
+
* In the top right corner of your desktop click the icon with a magnifying glass
* В верхнем правом углу найти значок лупы и нажать на него
+
* Type "Terminal" and press Enter
* Вбить в поиск слово «Терминал»
+
* Open the Terminal app
* Открыть приложение «Терминал»
+
* Input <code> sudo spctl --master-disable </code>
* Скопируйте туда <code> sudo spctl --master-disable </code>
+
* Press Enter and then close the window
* Нажмите Enter
+
This should allow you to start the program.
После этого программа будет запускаться из панели Dock.
 
 
<gallery widths=300px heights=200px perrow=7>
 
<gallery widths=300px heights=200px perrow=7>
File:Apple search.png|center|frame|поиск
+
File:Apple search.png|center|frame|Search
File:Apple terminal.png|center|frame|Терминал
+
File:Apple terminal.png|center|frame|Terminal
 
</gallery>
 
</gallery>
</div>
 
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
===Linux users===
===Пользователи Linux===
+
Download the app archive and extract it into a folder of your choice. Find the MPSyncer.UI file inside and double-click it to launch the program.
Скачайте архив и распакуйте его в любую папку. Найдите файл MPSyncer.UI и запустите его.
 
</div>
 
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
==How to work with Microstock+ Sync?==
==Как работать с Microstock+ Sync?==
+
 
+
===Logging in===
===Вход в аккаунт===
+
Launch the program and fill the form with your M+ email and password or sign in using an external service. If you don't have a M+ account yet - please register there first.
Для входа вам потребуется заполнить формы данными вашего аккаунта в M+ либо войти через соцсети. Если вы ещё не зарегистрировались в М+, сделайте это.
+
 
</div>
+
===Launching and configuring the M+Sync===
 +
First time you run M+ Sync, you will have to choose or create a folder that will serve as the root for the synchronization. You can change it later, but that will restart the synchronization process from scratch (unless you move your files there first).
 +
Once the folder is chosen or created, you will be able to configure the program using the top menu.
 +
* Use "Account" to log out or visit the M+ store (Pricing);
 +
* Use "Settings" to enable/disable the app autostart, change the interface language or modify the synchronization interval (in minutes);
 +
* Use "Help" to open a support chat or to read this article (M+ FAQ).
 +
 
 +
===Working with folders===
 +
To synchronize a specific M+ folder to a folder on your PC you can create a connection between them. In the left column (File tree) choose a folder you want to synchronize, click on the green button with a computer and a chain icon and specify any folder on your PC (or create a new one). When you synchronize a folder, all of its subfolders will be automatically synchronized so you don't have to create a connection for every subfolder manually.
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
 
===Запуск и настройки===
 
При первом запуске программа предложит вам создать стартовую папку для синхронизации файлов. Позже вы можете изменить её, но в этом случае синхронизировать все файлы придётся заново.
 
Когда папка создана, выставьте удобные вам настройки программы в верхнем меню.
 
* В пункте «Аккаунт» вы можете сменить аккаунт или перейти в [[Управление тарифами и пакетами подписок | магазин]] с помощью пункта «Тарифные планы»;
 
* В пункте «Настройки» можно включить автозапуск приложения, сменить язык и назначить интервал проверок (в минутах);
 
* В пункте «Помощь» можно перейти в чат поддержки, на наш канал поддержки в Telegram и в эту статью (на наш FAQ).
 
 
===Работа с папками===
 
Чтобы синхронизировать папку М+ с папкой на ПК вам нужно создать между ними связь. В крайнем левом столбце (файловом древе) выберите папку, которую вы бы хотели синхронизировать, а затем назначьте ей соответствие на ПК (либо создайте новую папку внутри той, которую выбрали при первом запуске программы). Если начать синхронизировать папку с любыми вложенными папками, то она синхронизируется вместе со структурой каталогов, и им назначать соответствие не нужно.
 
Для запуска синхронизации кликните по иконке в виде цепи и компьютера и укажите папку на вашем ПК.
 
 
[[File: Sync create connection.png|left|300px]]<br clear=all>
 
[[File: Sync create connection.png|left|300px]]<br clear=all>
Во избежание путаницы и ошибок система не позволяет синхронизировать две папки из М+ в одну папку на ПК, и если вы попытаетесь это сделать, то получите соответствующее уведомление. В этом случае вам следует создать ещё одну папку внутри существующей или выбрать другую.<br />
+
 
Чтобы переназначить папку для синхронизации, просто кликните по названию папки, куда синхронизируется папка М+ и переназначьте её.<br />
+
To avoid confusion and errors M+ Sync doesn't allow synchronizing two or more M+ folders into the same folder on your PC. If you try to do so, you will receive a message explaining that. In that case you will have to create/choose another folder.<br />
 +
To remap a connected folder to another folder on your PC, simply click on the currently connected folder and specify another one.<br />
 +
 
 
[[File: Sync change fold.png|left|300px]]<br clear=all>
 
[[File: Sync change fold.png|left|300px]]<br clear=all>
Чтобы разорвать связь между папками, наведите курсор мыши на иконку с цепью, и она заменится на красный крестик. Клик на крестик разорвёт связь между выбранными папками, хотя все уже синхронизированные файлы никуда не денутся.<br />
+
 
 +
To break a connection between folders, click the icon with a chain once so it turns into a red cross. All files that were already synchronized will remain on your PC.<br />
 +
 
 
[[File: Sync deconnect.png|left|300px]]<br clear=all>
 
[[File: Sync deconnect.png|left|300px]]<br clear=all>
Если вы решите восстановить связь с той же самой папкой, M+Sync просканирует файлы и перезапишет только изменения (в том числе докачает недостающие файлы) и продолжит синхронизацию.<br />
+
 
Для старта синхронизации активируйте кнопку-переключатель справа.
+
If you decide to re-connect folders after breaking the connection between them, M+ Sync will scan the files and update the local copy to ensure they match with the M+ version. After that it will continue the synchronization.<br />
 +
To start the synchronization press the toggle to the right.
 +
 
 
[[File: Sync process start.png|left|300px]]<br clear=all>
 
[[File: Sync process start.png|left|300px]]<br clear=all>
Появится полоса прогресса, а все файлы из этой папки в М+ будут загружены в указанное место. Если вы активировали кнопку-переключатель у вложенной папки, у всех папок выше по иерархии тоже возникнет полоса прогресса, но серого цвета. Это сделано для того, чтобы вы не потеряли синхронизирующуюся папку, если у вас очень разветвлённое древо. Каждый указанный период времени статусы файлов и метаданные будут обновляться в соответствии с информацией из М+.<br />
+
A progress bar for this folder will appear to the right. There will be also a summary progress bar at the bottom of the app window that will display the total progress and ETA for all folders currently being synchronized.  
Правые два столбика таблицы содержат информацию о папке: её вес, количество вложенных папок и файлов.
+
Files will be downloaded to the folder you have connected. If you're synchronizing a subfolder, a gray progress bar will appear for all folders containing it so that you won't miss what subfolders are being synchronized.
</div>
+
The app will keep periodically checking the M+ copy of the files for any new changes and will synchronize your local files to be up to date at all times. Interval of this check can be specified in settings as described above.<br />
 +
Two right-most columns contain basic information about the folders and their content: their total size and how many files and subfolders are inside.
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
===Closing the app===
===Закрытие программы===
+
On Windows clicking the close button in the top right corner will minimize the program into the taskbar. To close it completely, right click on the M+ Sync icon there and choose the quit command. Please note that Windows may hide infrequently used icons if you didn't disable it so you may have to click the button to reveal the hidden icons first. Alternatively, use Alt + F4 hotkey while the program window is active.
+
On Mac OS X use Cmd + Q shortcut or close it in the Dock panel.
Если вы используете Windows, клик по крестику в правом верхнем углу свернёт программу в фоновые процессы. Чтобы её закрыть, отобразите скрытые значки на нижней панели рабочего стола, сделайте правый клик мышью по иконке M+Sync и закройте приложение. Либо воспользуйтесь сочетанием клавиш Alt+F4 <br />
 
В Mac OS X нажмите сочетание Cmd+Q либо закройте программу из панели Dock.
 
</div>
 
  
<div lang="ru" dir="ltr" class="mw-content-ltr">
+
==Removing the program==
==Удаление программы==
+
Use the standard uninstall methods to remove the program (Windows and Mac OS X) or just remove the program folder (Linux).
Воспользуйтесь стандартными средствами удаления программного обеспечения вашей системы (Windows, Mac OS X) или просто удалите папку с программой (Linux).
 
</div>
 

Текущая версия на 15:42, 1 марта 2021

Microstock+ Sync is a software for one-way synchronization from the M+ cloud storage to your PC. The program allows you to finely select the folders you would like to keep synchronized and preserves the M+ directory structure. As long as the synchronization is active, any changes in files and metadata in the selected folders are instantly reflected on your hard drive.
The sortware is completely free to use and runs on Windows, Mac OS X and Linux.

Downloading and installing M+ Sync

Simply click on the M+ Syncer section in the M+ interface to get to the app home page.

Click the "Download" button and choose your OS to download the installer.

Windows users

Download the installation package, run it with a double click and follow the instructions. Permit the installation if the system asks you to. Once the installation is completed, you can launch the program using its shortcut on the desktop or from the Start menu.

Mac OS X users

Download the installation package and open it with a double click. It will mount the installer image automatically and you will see the "Microstock+ Sync Installer" icon on your desktop. Open it with a double-click and move the app in the window that will appear as the arrow there suggests.

Apple doesn't allow running third-party apps if they don't have the Trusted eSign even if they're 100% safe. To bypass the protection system please do the following:

  • Launch the program. You'll receive a message that the program has been blocked by the security system
  • Open the settings and find "Security and Privacy" section
  • Click the "Open anyway" button
  • Commit the changes in the dialogue box

The alternative way:

  • In the top right corner of your desktop click the icon with a magnifying glass
  • Type "Terminal" and press Enter
  • Open the Terminal app
  • Input sudo spctl --master-disable
  • Press Enter and then close the window

This should allow you to start the program.

Linux users

Download the app archive and extract it into a folder of your choice. Find the MPSyncer.UI file inside and double-click it to launch the program.

How to work with Microstock+ Sync?

Logging in

Launch the program and fill the form with your M+ email and password or sign in using an external service. If you don't have a M+ account yet - please register there first.

Launching and configuring the M+Sync

First time you run M+ Sync, you will have to choose or create a folder that will serve as the root for the synchronization. You can change it later, but that will restart the synchronization process from scratch (unless you move your files there first). Once the folder is chosen or created, you will be able to configure the program using the top menu.

  • Use "Account" to log out or visit the M+ store (Pricing);
  • Use "Settings" to enable/disable the app autostart, change the interface language or modify the synchronization interval (in minutes);
  • Use "Help" to open a support chat or to read this article (M+ FAQ).

Working with folders

To synchronize a specific M+ folder to a folder on your PC you can create a connection between them. In the left column (File tree) choose a folder you want to synchronize, click on the green button with a computer and a chain icon and specify any folder on your PC (or create a new one). When you synchronize a folder, all of its subfolders will be automatically synchronized so you don't have to create a connection for every subfolder manually.

Sync create connection.png


To avoid confusion and errors M+ Sync doesn't allow synchronizing two or more M+ folders into the same folder on your PC. If you try to do so, you will receive a message explaining that. In that case you will have to create/choose another folder.
To remap a connected folder to another folder on your PC, simply click on the currently connected folder and specify another one.

Sync change fold.png


To break a connection between folders, click the icon with a chain once so it turns into a red cross. All files that were already synchronized will remain on your PC.

Sync deconnect.png


If you decide to re-connect folders after breaking the connection between them, M+ Sync will scan the files and update the local copy to ensure they match with the M+ version. After that it will continue the synchronization.
To start the synchronization press the toggle to the right.

Sync process start.png


A progress bar for this folder will appear to the right. There will be also a summary progress bar at the bottom of the app window that will display the total progress and ETA for all folders currently being synchronized. Files will be downloaded to the folder you have connected. If you're synchronizing a subfolder, a gray progress bar will appear for all folders containing it so that you won't miss what subfolders are being synchronized. The app will keep periodically checking the M+ copy of the files for any new changes and will synchronize your local files to be up to date at all times. Interval of this check can be specified in settings as described above.
Two right-most columns contain basic information about the folders and their content: their total size and how many files and subfolders are inside.

Closing the app

On Windows clicking the close button in the top right corner will minimize the program into the taskbar. To close it completely, right click on the M+ Sync icon there and choose the quit command. Please note that Windows may hide infrequently used icons if you didn't disable it so you may have to click the button to reveal the hidden icons first. Alternatively, use Alt + F4 hotkey while the program window is active. On Mac OS X use Cmd + Q shortcut or close it in the Dock panel.

Removing the program

Use the standard uninstall methods to remove the program (Windows and Mac OS X) or just remove the program folder (Linux).